Window Films - Heat Resistant Film - SOL 102 - Protection 79% - Exterior - Silver
The solar protection adhesive film SOL 102 allows overcoming the greenhouse phenomenon effectively. This film rejects 79% of solar energy and reduces the overheating keeping the external vision. It is a real factor for improved comfort.
The solar protection adhesive films are composed of 2 layers of vacuum-metalized polyester, an adhesive and a protective film (which is to be removed while installation). They are scratch-proof.
For all types of mineral or synthetic glass exposed to the sun.
Application method :
External surface with soapy water.
Glass maintenance :
Solution of soapy water, 30 days after installation. Products that could scratch the film should not be used. Do not put stickers or any other adhesives on the film.
12 to 15 years for vertical application in Central Europe
2 years from the delivery. This film should be kept away from excessive moisture and away from direct sunlight at temperature below 38° C.
IMPORTANT FACTORS :
The adhesive surface must be free of dust, grease or other contaminants.
Lack of compatibility : degassing phenomenon may occur in some polycarbonate plates, too new or of poor quality, which can affect the appearance, but does not allow the quality of the film to be questioned. Therefore, earlier testing should be carried out.
|Fire performance class||M1|
|Material||Polyester 36 microns|
|Adhesive||Acrylic polymer 19 gr/m²|
|Release liner||Sylicone Polyester 23 microns|
|Solar energy reflection||65%|
|Total solar absorption||24%|
|Solar energy transmission||11%|
|Visible light transmission||16%|
|Reflection of visible light||60%|
|Solar energy rejected||79%|
|Thermal resistance||from -20° to 80°C|
|Application temperature||Minimum 5°C|